Back To Blog

Plan to Sell your home over the next 6 months?

You have made the decision to put your home up for sale sometime over the next 6 months. With Fall here your plans will come to pass during the winter selling season.

While the weather holds and before you stick the sign in the yard there are a few things you will want to do.   First, it will be helpful to contact your Coldwell Banker Upton-Massamont REALTOR now to see what suggestions they may have to assist with the process.

Here are just a few of the basic repairs you will want to conquer before the first prospective buyer walks through the door:

1.Tackle the Entrance

This is the first thing people see when they come to your home. Paint the front door and trim surrounding the door. Repair sagging screen doors and replace any missing or corroded hinge screws and tighten the rest.

2. Spruce up the Perimeter

Walk the perimeter of your home, clear away dead plants, clip blossoms, and clear away leaves and other yard waste.

3. Recheck the roof

Any problem that has the word roof in it scares a buyer away immediately. Replace missing shingles and fix hanging gutters.  Remove any moss growing on the roof as this shows signs of neglect.

4. Clear and caulk gutters.

Clear all the debris out of the gutters and recaulk the gutter end caps.

5. Patch nail holes and repaint.

Patch up nail holes in the walls of your home. Use a lightweight putty to fill the holes and paint the repaired spots.

6. Clean the Grout

Deep clean tile grout with bleach.  Regrout tiles where needed and recaulk cracks between sinks, tubs, toilets, counters and floors. This will give your tile a whole new look.

7. Stop Dripping Faucets

Fix leaky faucets before the buyer notices them.  You may need to call in a plumber to do this task. Before you do that you can shut off the water supply and check for moisture on the wall around the valves and on the floor of the sink cabinet. Many hardware stores carry faucet rebuild kits that contain the 6 to 12 parts most likely to fail, including the metal ball, O rings, springs and gaskets.

 

 

Add Comment

Comments are moderated. Please be patient if your comment does not appear immediately. Thank you.

Comments

  1. No comments. Be the first to comment.